GMC model GML-1236BG Geared Head Bench Lathe
$2950.
• 12" swing diameter x 36" center distance
• ISO 9001 certified factory in China
• Fully enclosed precision gearbox
• Spindle bore 1-1/2"
• Heavy duty spindle D1-4
• Rigid guideway width 7-1/2"
• Heavy duty main motor; 2 HP, 220 volts, 1 phase.
• 9 spindle speeds from 65 to 1400 rpm, speeds: 65/200/230/280/360/600/800/1000/1400 rpm
• 36 kinds of inch threads, and 28 metric threads
• Spindle is balanced, hardened and precision ground
• Spindle is supported at 3-points by high precision bearings
• All gears and shafts are hardened and precision ground
• Guideways induction hardened and precision ground
• Automatic lubrication system in headstock and feed box
• One year warranty on all parts

Specifications:
• Maximum swing over cross slide: 7" dia.
• 40 kinds of Longitudinal feeds; 0.002 - 0.06 I.P.R.
• 40 kinds of cross feeds; 0.001 - 0.04 I.P.R.
• Inch threads: 4 to 56 T.P.I., 36 kinds
• Metric threads: 0.45 to 7.2mm I.P.R., 28 kinds
• Spindle Taper: MT5
• Tailstock Taper: MT3
• Max swing diameter in gap: 17-1/4"
• Max travel of top slide: 4-1/4"
• Max travel of cross slide: 7-1/4"
• Weight: 1150 Lbs.
• Size: 67" x 31" x 56"

Click to Request this quote and info packet
or call 773-334-5000 for more info about this machine.

Standard Equipment
• (2) support stands
• 6" 3- jaw chuck with set reversible jaws
• 8" 4-jaw chuck with reversible jaws
• 10" Face plate
• 3-3/4" steady rest
• 2" follow rest
• Removable gap
• 4-way tool post
• Full length splash guard
• (2) dead centers
• Reducing sleeve
• Thread chasing dial
• Tool box

Optional Equipment:
• Digital Readout
• Taper Turning Attachment
• Coolant System
• Micro-Carriage Stop
• Quick Change Tool Post
• 5-C Collet Closer
• Live Center
• Drill Chuck, Carbide Turning Tools, etc

GMC model GML-1440BG Geared Head Bench Lathe

• 14" swing diameter x 40" center distance
• ISO 9001 certified factory
• Fully enclosed precision gearbox
• Spindle bore 1-1/2"
• Heavy duty spindle D1-4
• Rigid guideway width 7-1/2"
• Heavy duty main motor 3 HP, 220 volts, 1 phase
• 9 spindle speeds from 65 to 2000 rpm, speeds: 65/120/190/300/480/750/1250/2000 rpm
• 38 kinds of inch threads, and 28 metric threads
• Spindle is balanced, hardened and precision ground
• Spindle is supported at 3-points by high precision bearings
• All gears and shafts are hardened and precision ground
• Guideways induction hardened and precision ground
• Automatic lubrication system in headstock and feed box
• One year warranty on all parts

Specifications:
• Maximum swing over cross slide: 8-1/4" diameter
• 36 kinds of Longitudinal feeds; 0.002 - 0.03 I.P.R.
• 36 kinds of cross feeds; 0.0008 - 0.010 I.P.R.
• Inch threads: 8 to 112 T.P.I., 38 kinds
• Metric threads: 0.45-7.2mm I.P.R., 28 kinds
• Spindle Taper: MT5
• Tailstock Taper: MT3
• Max swing in gap: 19-1/4" diameter
• Max travel of top slide: 4-1/4"
• Max travel of cross slide: 7-1/4"
• Weight: 1300 Lbs.
• Size: 68" x 32" x 57"

Click to Request this quote and info packet
or call 773-334-5000 for more info about this machine.

Standard Equipment
• (2) support stands
• 6" 3- jaw chuck with set reversible jaws
• 8" 4-jaw chuck with reversible jaws
• 10" Face plate
• 3-3/4" steady rest
• 2" follow rest
• Removable gap
• 4-way tool post
• Full length splash guard
• (2) dead centers
• Reducing sleeve
• Thread chasing dial
• Tool box

Optional Equipment:
• Digital Readout
• Taper Turning Attachment
• Coolant System
• Micro-Carriage Stop
• Quick Change Tool Post
• 5-C Collet Closer
• Live Center
• Drill Chuck, Carbide Turning Tools, etc

GMC model GML-1440BGF Geared Head Bench Lathe

• 14" swing diameter x 40" center distance
• Foot Brake
• Coolant System
• Work Light
• ISO 9001 certified factory
• Fully enclosed precision gearbox
• Spindle bore 1-1/2"
• Heavy duty spindle D1-4
• Rigid guideway width 7-1/2"
• Heavy duty main motor 3 HP, 220 volts, 1 phase
• 9 spindle speeds from 65 to 2000 rpm, speeds: 65/120/190/300/480/750/1250/2000 rpm
• 38 kinds of inch threads, and 28 metric threads
• Spindle is balanced, hardened and precision ground
• Spindle is supported at 3-points by high precision bearings
• All gears and shafts are hardened and precision ground
• Guideways induction hardened and precision ground
• Automatic lubrication system in headstock and feed box
• One year warranty on all parts

Specifications:
• Maximum swing over cross slide: 8-1/8" diameter
• 36 kinds of Longitudinal feeds; 0.002 - 0.03 I.P.R.
• 36 kinds of cross feeds; 0.0008 - 0.010 I.P.R.
• Inch threads: 8 to 112 T.P.I., 38 kinds
• Metric threads: 0.45-7.2mm I.P.R., 28 kinds
• Spindle Taper: MT5
• Tailstock Taper: MT3
• Max swing in gap: 19-1/4" diameter
• Max travel of top slide: 4-1/4"
• Max travel of cross slide: 7-1/4"
• Weight: 1700 Lbs.
• Size: 70" x 35" x 59"

Click to Request this quote and info packet
or call 773-334-5000 for more info about this machine.

Optional Equipment:
• Digital Readout
• Taper Turning Attachment
• Micro-Carriage Stop
• Quick Change Tool Post
• 5-C Collet Closer
• Live Center
• Drill Chuck, Carbide Turning Tools, etc

GMC model GML-1440HD Heavy Duty Gear Head Lathe

• 14" swing diameter x 40" center distance
• Heavy Cast Iron Base
• Foot Brake
• Coolant System
• Work Light
• Taper Turning Attachment
• Larger Spindle bore: 2-1/16"
• Threading and feed rate change without changing gears
• ISO 9001 certified factory
• Fully enclosed precision gearbox
• Heavy duty spindle D1-6
• Heavy duty guideway width 10-1/4"
• Heavy duty main motor 6 HP, 220 volts, 3 phase
• 16 speeds: 45 to 1800 rpm: 40/ 70/ 90/ 140/ 165/ 215/ 255/ 330/ 350/ 385/ 585/ 690/ 770/ 900/ 1170/ 1800 rpm
• 40 kinds of inch threads, and 22 metric threads
• Spindle is balanced, hardened and precision ground
• Spindle is supported at 3-points by high precision bearings
• All gears and shafts are hardened and precision ground
• Guideways induction hardened and precision ground
• Automatic lubrication system in headstock and feed box
• One year warranty on all parts

Specifications:
• Maximum swing over cross slide: 8-1/2" diameter
• 36 kinds of Longitudinal feeds; 0.0018 - 0.07 I.P.R.
• 36 kinds of cross feeds; 0.0009 - 0.030 I.P.R.
• Inch threads: 2 to 70 T.P.I., 45 kinds
• Metric threads: 0.2 - 14mm I.P.R., 39 kinds
• Module threads: 0.3 - 3.6 mm, 18 kinds
• Diametral pitch threads: 8 - 40 DP, 21 kinds
• Spindle Taper: MT6
• Tailstock Taper: MT4
• Max swing in gap: 21-1/2" diameter
• Max travel of top slide: 4-1/4"
• Max travel of cross slide: 8-1/2"
• Weight: 4350 Lbs.

Click to Request this quote and info packet
or call 773-334-5000 for more info about this machine.

Standard Equipment
• Foot Brake
• Coolant System
• Work Light
• Cast Iron Base
• Taper turning attachment
• Oil pump on apron
• 8" 3- jaw chuck with set reversible jaws
• 10" 4-jaw chuck with reversible jaws
• 12" Face plate
• 5-1/2" steady rest
• 2" follow rest
• Removable gap
• 4-way tool post
• Full length splash guard
• (2) dead centers
• Reducing sleeve
• Thread chasing dial
• Tool box

Optional Equipment:
• Digital Readout
• Micro-Carriage Stop
• Quick Change Tool Post
• 5-C Collet Closer
• Live Center
• Drill Chuck, Carbide Turning Tools, etc

GMC Precision Heavy Duty Gear Head Lathes
GML-1640HD
GML-1660HD

• 16" swing diameter x 40" or 60" center distances
• Heavy Cast Iron Base
• Foot Brake
• Coolant System
• Work Light
• Taper Turning Attachment
• Spindle bore: 2-1/16"
• ISO 9001 certified factory
• Fully enclosed precision gearbox
• Heavy duty spindle D1-6
• Heavy duty guideway width 10-1/4"
• Heavy duty main motor 6 HP, 220 volts, 3 phase
• 16 speeds: 45 - 1800 rpm: 40/ 70/ 90/ 140/ 165/ 215/ 255/ 330/ 350/ 385/ 585/ 690/ 770/ 900/ 1170/ 1800 rpm
• 40 kinds of inch threads, and 22 metric threads
• Threading and feed rate change without changing gears
• Spindle is balanced, hardened and precision ground
• Spindle is supported at 3-points by high precision bearings
• All gears and shafts are hardened and precision ground
• Guideways induction hardened and precision ground
• Automatic lubrication system in headstock and feed box
• One year warranty on all parts

Specifications:
• Maximum swing over cross slide: 8-1/2" diameter
• Max swing in gap: 21-1/2" diameter
• 36 kinds of Longitudinal feeds; 0.0018 - 0.07 I.P.R.
• 36 kinds of cross feeds; 0.0009 - 0.030 I.P.R.
• Inch threads: 2 to 70 T.P.I., 45 kinds
• Metric threads: 0.2 - 14mm I.P.R., 39 kinds
• Module threads: 0.3 - 3.6 mm, 18 kinds
• Diametral pitch threads: 8 - 40 DP, 21 kinds
• Spindle Taper: MT6
• Tailstock Taper: MT4
• Toolpost size: 1" square
• Max travel of top slide: 4-1/4"
• Max travel of cross slide: 8-1/2"
• Weight: GML1640HD: 5150 Lbs / GML1660HD: 5750 Lbs

Click to Request this quote and info packet
or call 773-334-5000 for more info about this machine.

Optional Equipment:
• Digital Readout
• Micro-Carriage Stop
• Quick Change Tool Post
• 5-C Collet Closer
• Live Center
• Drill Chuck, Carbide Turning Tools, etc

GMC Precision Heavier Duty Gear Head Lathes
GT-1640DB • 16" swing diameter x 40" center distance
GT-1660DB • 16" swing diameter x 60" center distance
GT-1840DB • 18" swing diameter x 40" center distance
GT-1860DB • 18" swing diameter x 60" center distance

• Heavier Cast Iron Base
• Foot Brake
• Coolant System
• Work Light
• Taper Turning Attachment
• Larger Spindle bore: 3-1/16"
• Larger Motor: 7.5 HP, 220v or 440volts, 3 phase
• Extra slow low speed
• ISO 9001 certified factory
• Fully enclosed precision gearbox
• Heavy duty spindle D1-8
• Heavy duty guideway width 11-13/16"
• 12 speeds: 24 - 1600 rpm: 24/ 55/ 85/ 120/ 185/ 275/ 350/ 400/ 605/ 910/ 1330/ 1600 rpm
• 40 kinds of inch threads, and 53 metric threads
• Threading and feed rate change without changing gears
• Spindle is balanced, hardened and precision ground
• Spindle is supported at 3-points by high precision bearings
• All gears and shafts are hardened and precision ground
• Guideways induction hardened and precision ground
• Automatic lubrication system in headstock and feed box
• One year warranty on all parts

Specifications:
• Maximum swing over cross slide:
1640 & 1660: 9-7/16" dia. / 1840 & 1860: 11-5/16" dia.
• 42 kinds of Longitudinal feeds; 0.0012 - 0.0252 I.P.R.
• 42 kinds of cross feeds; 0.0009 - 0.0126 I.P.R.
• Inch threads: 2 to 56 T.P.I., 40 kinds
• Metric threads: 0.4 - 14mm I.P.R., 53 kinds
• Module threads: 0.4 - 7mm, 32 kinds
• Diametral pitch threads: 8 - 40 DP, 21 kinds
• Spindle Taper: MT6
• Tailstock Taper: MT4
• Max swing in gap:
1640 & 1660: 23-7/16" dia. / 1840 & 1860: 25-3/16" dia.
• Max travel of top slide: 5"
• Max travel of cross slide: 12"
• Max weight of workpiece: 800 Lbs
• Net Weight: GT1640DB: 5450 Lbs / GT1660DB: 6150 Lbs
GT1840DB: 6100 Lbs / GT1860DB: 6750 Lbs

Standard Equipment
• Foot Brake
• Coolant System
• Work Light
• Cast Iron Base
• Taper turning attachment
• Oil pump on apron
• Auto carriage stop
• 10" 3- jaw chuck with set reversible jaws
• 12" 4-jaw chuck with reversible jaws
• 16" face plate
• 8" drive plate
• 5-1/2" steady rest
• 3" follow rest
• Removable gap
• 4-way tool post
• Full length splash guard
• (2) dead centers
• Reducing sleeve
• Tool box

Optional Equipment:
• Digital Readout
• Micro-Carriage Stop
• Quick Change Tool Post
• 5-C Collet Closer
• Live Center
• Drill Chuck
• Carbide Turning Tools, etc

Click to Request the GT-1640DB Quote
Click to Request the GT-1660DB Quote
Click to Request the GT-1840DB Quote
Click to Request the GT-1860DB Quote
or call us at 773-334-5000.

GMC Precision Heavier Duty Gear Head Lathes
GT-2060 • 20" swing diameter x 60" center distance
GT-2080 • 20" swing diameter x 80" center distance
GT-20120 • 20" swing diameter x 120" center distance

• Ajustable Spindle Clutch: Forward, Reverse, Stop
• Heavier Cast Iron Base
• Foot Brake
• Coolant System
• Work Light
• Taper Turning Attachment
• Larger Spindle bore: 4-1/8"
• Larger Motor: 10 HP, 220v or 440volts, 3 phase
• Rapid Traverse
• ISO 9002 certified factory
• Fully enclosed precision gearbox
• Heavy duty spindle D1-8
• Heavy duty guideway width 15-1/2"
• 12 speeds: 36 - 1600 rpm
• 25 kinds of inch threads, and 22 metric threads
• Threading and feed rate change without changing gears out
• Spindle is balanced, hardened and precision ground
• Spindle is supported at 3-points by high precision bearings
• All gears and shafts are hardened and precision ground
• Guideways induction hardened and precision ground
• Automatic lubrication system, headstock and feed box
• One year warranty on all parts

Specifications:
• Maximum swing over cross slide: 12"
• Max swing in gap: 28"
• 65 kinds of Longitudinal feeds; 0.0023 - 0.093 I.P.R.
• 65 kinds of cross feeds; 0.0011 - 0.04 I.P.R.
• Inch threads: 2 to 28 T.P.I., 25 kinds
• Metric threads: 1 - 14mm I.P.R., 22 kinds
• Module threads: 0.5 - 7mm, 18 kinds
• Diametral pitch threads: 4 - 56 DP, 24 kinds
• Spindle taper: MT6
• Tailstock taper: MT5
• Toolpost size: 1" square
• Max travel of top slide: 5-3/4"
• Max travel of cross slide: 12-1/2"
• Max weight of workpiece: 2000 Lbs
• Machine Net Weight:
GT2060: 8100 Lbs
GT2080: 8350 Lbs
GT20120: 9350 Lbs

Optional Equipment:
• Digital Readout
• Micro-Carriage Stop
• Quick Change Tool Post
• 5-C Collet Closer
• Live Center
• Drill Chuck
• Carbide Turning Tools, etc

Click to Request the GT-2060 Quote
Click to Request the GT-2080 Quote
Click to Request the GT-20120 Quote
or call us at 773-334-5000.

GMC Precision Heavier Duty Gear Head Lathes
GT-2680 • 26" swing diameter x 80" center distance
GT-26120 • 26" swing diameter x 120" center distance
GT-3280 • 32" swing diameter x 80" center distance
GT-32120 • 32" swing diameter x 120" center distance

• Ajustable Spindle Clutch: Forward, Reverse, Stop
• Heavy Cast Iron Base
• Foot Brake
• Coolant System
• Work Light
• Taper Turning Attachment
• Larger Spindle bore: 4-1/8"
• Larger Motor: 15 HP, 220v or 440volts, 3 phase
• Rapid Traverse
• ISO 9002 certified factory
• Fully enclosed precision gearbox
• Heavy duty spindle D1-8
• Heavy duty guideway width 15-1/2"
• 12 speeds: 36 - 1600 rpm
• 27 kinds of inch threads, and 22 metric threads
• Threading and feed rate change without changing gears out
• Spindle is balanced, hardened and precision ground
• Spindle is supported at 3-points by high precision bearings
• All gears and shafts are hardened and precision ground
• Guideways induction hardened and precision ground
• Automatic lubrication system, headstock and feed box
• One year warranty on all parts

Specifications:
• Maximum swing over cross slide: 16-1/2"
• Max swing in gap: 34-1/4"
• 65 kinds of Longitudinal feeds; 0.0023 - 0.093 I.P.R.
• 65 kinds of cross feeds; 0.0011 - 0.04 I.P.R.
• Inch threads: 2 to 28 T.P.I., 27 kinds
• Metric threads: 1 - 14mm I.P.R., 22 kinds
• Module threads: 0.5 - 7mm, 18 kinds
• Diametral pitch threads: 4 - 56 DP, 24 kinds
• Spindle taper: MT6
• Tailstock taper: MT5
• Toolpost size: 1" square
• Max travel of top slide: 5-3/4"
• Max travel of cross slide: 14"
• Max weight of workpiece: 2000 Lbs
• Machine Net Weight:
GT2680: 8700 Lbs
GT26120: 9500 Lbs

Optional Equipment:
• Digital Readout
• Micro-Carriage Stop
• Quick Change Tool Post
• 5-C Collet Closer
• Live Center
• Drill Chuck
• Carbide Turning Tools, etc

Click to Request the GT-2680 Quote
Click to Request the GT-26120 Quote
Click to Request the GT-3280 Quote
Click to Request the GT-32120 Quote
or call us at 773-334-5000.

GMC Precision Heavier Duty Precision Gap Bed Lathes with Clutch
• Available with 26", 32" or 40 swing diameters
• Available in 80" to 240" center distances

• Hydraulic Spindle Clutch for Forward, Reverse and Stop
• Heavier Cast Iron Base
• Coolant System
• Work Light
• Larger Spindle bore: 5-1/8"
• Larger Motor: 20HP, 220v or 440volts,3phase
• 4 way Rapid Traverse
• ISO 9001 certified factory
• All threading done without changing gears out
• Heavier duty spindle D1-11 Camlock
• Heavier duty guideway width 21-11/16"
• 18 speeds: 7.5 to 1000 rpm
• Threading and feed rate change without changing gears out
• Spindle is hardened and precision ground
• Spindle is supported at 3-points by high precision bearings
• All gears and shafts are hardened and precision ground
• Guideways induction hardened and precision ground
• Automatic lubrication system, headstock and feed box
• One year warranty on all parts Maximum swing dia meter over cross slide

Specifications:

• 64 longitudinal feeds; 0.002 - 0.096 I.P.R.
• 64 cross feeds; 0.001 - 0.048 I.P.R.
• Inch threads: 1/16 to 32 T.P.I., 27 kinds
• Metric threads: 1 - 256mm I.P.R., 22 kinds
• Module threads: 0.5 - 128mm, 18 kinds
• Diametral pitch threads: 1/8 - 32 D.P., 24 kinds
• Spindle taper: MT6
• Tailstock taper: MT5
• Toolpost size: 1" square
• Max travel of top slide: 8"

Optional Equipment:
• Digital Readout
• Taper turning attachment
• Micro-Carriage Stop
• Quick Change Tool Post
• 5-C Collet Closer
• Live Center
• Drill Chuck
• Carbide Turning Tools, etc

Click to Request the GML-2680 Quote
Click to Request the GML-26120 Quote
Click to Request the GML-26160 Quote
Click to Request the GML-26200 Quote
Click to Request the GML-26240 Quote

Click to Request the GML-3280 Quote
Click to Request the GML-32120 Quote
Click to Request the GML-32160 Quote
Click to Request the GML-32200 Quote
Click to Request the GML-32240 Quote

Click to Request the GML-4080 Quote
Click to Request the GML-40120 Quote
Click to Request the GML-40160 Quote
Click to Request the GML-40200 Quote
Click to Request the GML-40240 Quote
or call us at 773-334-5000.